Need help?Do you have a question about the Honda WN20 and is the answer not in the manual?
General| Total Head Lift | 32 m |
|---|---|
| Suction Head Lift | 8 m |
| Maximum Pumping Capacity | 600 L/min |
| Starting System | Recoil |
| Fuel Tank Capacity | 2.0 liters |
| Dimensions (L x W x H) | 455 x 365 x 420 mm |
| Bore x Stroke | 60 x 42 mm |
| Max. Suction Lift | 8 m |
| Type | Centrifugal |
| Engine Type | 4-stroke, single cylinder, OHV |
| Displacement | 118 cc |
| Max. Power Output | 2.6 kW (3.5 HP) at 3, 600 rpm |
| Max. Flow Rate | 600 liters/min |
| Discharge Port Diameter | 50 mm (2 inches) |
| Suction Port Diameter | 50 mm (2 inches) |
| Engine | Honda GX120 |
Discusses the importance of safety information in the manual and on the pump, including labels and messages.
Covers operator responsibility, pump operation, refueling care, and hot exhaust warnings for safe use.
Explains the importance of safety labels and where to find them on the pump.
Identifies and illustrates the key components and controls of the water pump.
Details the functions of the choke rod, throttle lever, and Oil Alert system for pump operation.
Emphasizes reading the manual, understanding controls, and knowing emergency procedures for safe operation.
Guides on checking pump condition, hoses, and engine (oil, air filter, fuel) before starting.
Covers essential safety measures for operating the pump, including ventilation and avoiding hazardous liquids.
Details pump placement, hose installation, priming, and engine starting procedures.
Guides on setting engine speed, checking output, and safely stopping the engine.
Explains why regular maintenance is crucial and outlines critical safety precautions to follow.
Provides a schedule for inspections, oil changes, refueling, and spark plug service.
Instructions for servicing the spark arrester, including cleaning and checking for damage.
Essential steps for cleaning, draining fuel, and changing oil to prepare the pump for storage.
Guidelines for selecting a safe storage location and protecting the pump from environmental factors.
Instructions for safely transporting the pump, including cooling periods and securing methods.
Guides on diagnosing and resolving issues like engine not starting or lacking power.
Provides steps for diagnosing and fixing problems such as no pump output or low pump output.
Contains technical data, specifications, and information on carburetor modifications and oxygenated fuels.
Covers emission control systems, replacement parts, air index, and detailed technical specifications for WN20/WN30.
Lists available Honda publications and customer service contact details for support.
Provides a quick overview of fuel, engine oil, spark plug, carburetor, and maintenance details.
To Next Page
