Need help?Do you have a question about the Honda XRE 190 and is the answer not in the manual?
General| Displacement | 184.4 cc |
|---|---|
| Transmission | 5-speed |
| Fuel System | PGM-FI (Programmed Fuel Injection) |
| Front Suspension | Telescopic fork |
| Front Brake | Disc |
| Rear Brake | Disc |
| Fuel Tank Capacity | 13.5 liters |
| Engine Type | Single-cylinder, 4-stroke, OHC |
| Rear Suspension | Pro-link |
Explains safety labels and signal words like WARNING and NOTICE used in the manual.
Covers general safety, riding posture, defensive riding, and visibility.
Alerts to off-road hazards, alcohol risks, and crash procedures.
Details protective apparel, helmet requirements, and carbon monoxide hazards.
Explains braking techniques, ABS function, and safe parking procedures.
Covers parking with side stand, theft prevention, and refuelling guidelines.
Covers safety for off-road riding and guidelines for secure, balanced loading to maintain stability.
Identifies key components of the motorcycle using numbered diagrams and labels.
Continues identification of motorcycle components, including levers, covers, and electrical parts.
Explains the clock, fuel gauge, and basic display checks on the instrument panel.
Details odometer, tripmeter, and fuel mileage readings, including reset procedures.
Covers adjusting clock and backlight brightness settings on the instrument panel.
Describes the function of turn signal, high beam, and ABS indicators on the instrument panel.
Explains the neutral indicator and the PGM-FI (engine) malfunction indicator lamp.
Details the operation of the ignition switch and the engine stop switch for safety.
Describes the function of the start button, horn button, headlight dimmer, and turn signal switches.
Provides instructions on how to lock and unlock the motorcycle's steering for security.
Outlines the step-by-step procedure for starting the engine, including warm and cold starts.
Offers guidance on what to do if the engine fails to start or starts unstably.
Stresses maintenance importance and outlines essential safety precautions for service.
Details the maintenance schedule, service intervals, levels, and legend for proper upkeep.
Covers pre-ride checks, off-road specific checks, and guidelines for replacing parts.
Explains care for the maintenance-free battery and steps for cleaning corroded terminals.
Guides on checking for blown fuses and replacing them correctly with matching ratings.
Covers selecting appropriate oil, checking levels, and quality considerations.
Explains how to check brake fluid levels and specifies the recommended DOT fluid type.
Guides on inspecting drive chain condition, slack, and proper cleaning/lubrication procedures.
Guides on inspecting tyres for cuts, wear, tread depth, and rim condition.
Provides crucial advice on replacing tyres, including using correct types and replacing the inner tube.
Provides step-by-step instructions for removing and reinstalling the motorcycle battery.
Details the procedure for removing and installing clips used in various motorcycle components.
Explains how to remove and reinstall the meter panel, including handling tabs and bolts.
Provides instructions for removing and reinstalling the motorcycle seat.
Details the procedure for removing and installing the left and right side covers.
Guides on checking the spark plug condition and adjusting its gap for optimal performance.
Details the correct procedure for installing and tightening the spark plug to prevent engine damage.
Provides steps to check the engine oil level and the correct procedure for adding oil.
Details the process for changing engine oil, including tools, torque, and capacity.
Explains how to check front and rear brake fluid reservoir levels and recommended fluid type.
Guides on checking brake pads for wear indicators and when replacement is necessary.
Covers checking chain slack, wear, slider condition, and adjustment procedures.
Details how to check and adjust clutch lever freeplay using upper and lower adjusters.
Details how to check throttle rotation smoothness and freeplay at the grip flange.
Explains how to adjust the vertical aim of the headlight for proper alignment.
Provides troubleshooting steps for issues where the starter motor operates but the engine doesn't, or the motor doesn't operate.
Explains PGM-FI and ABS indicators and recommended actions if they light up or flash.
Describes fuel gauge errors and recommends dealer service for tyre punctures.
Provides steps for removing and installing both the front and rear wheels of the motorcycle.
Advises on key management and correct usage of ignition/engine stop switches to prevent battery drain.
Notes odometer display limits, document storage, and ignition cut-off system function.
Details the motorcycle washing process and essential precautions to protect components.
Provides cleaning advice for aluminium parts, panels, and exhaust components to prevent damage.
Provides guidelines for storing the motorcycle for extended periods, including battery care and lubrication.
Advises on proper methods for transporting the motorcycle using trailers or trucks, and warns against towing.
Recommends environmentally friendly cleaning and proper disposal of hazardous waste.
Explains the importance of frame and engine serial numbers for registration and parts ordering.
Discusses alcohol blended fuels and guidelines to protect the catalytic converter.
Lists detailed specifications for dimensions, weight, and fluid/load capacities.
Covers engine details, electrical components, lighting, and torque values for fasteners.
Provides specifications for chassis, suspension travel, tyre types, and brake systems.
Lists detailed tyre sizes, pressures, minimum tread depth, and turning radius.
Details transmission type, clutch, gear ratios, drive chain specs, and lubricant recommendations.
To Next Page
