uuOperating the Switches Around the Steering WheeluAuto High-Beam
*
248
■
Manual switching between high-beam and low-beam
If you want to manually switch the headlights between high beam and low beam,
follow either of the procedures below. Note that when you do this, the auto high-
beam indicator will turn off and the auto high-beam will be deactivated.
Using the lever:
Pull the lever towards you for flashing the high beams then release it or push the
lever forward to the high beam position.
u To reactivate the auto high-beam, follow either of the procedures below and
the auto high-beam indicator will come on.
• Pull the lever towards you and release it.
•
Turn the light switch to and then to
AUTO
when the lever is in the low beam position.
Using the light switch:
Turn the light switch to .
u To reactivate the auto high-beam, turn the light switch to AUTO when the
lever is in the low beam position, and the auto high-beam indicator will come
on.
1Auto High-Beam
*
How to turn off the Auto High-Beam System
You can turn the auto high-beam system on and off.
2 How to Customize the Vehicle Settings
P. 377
* Not available on all models
25 ZR-V HEV GHAC (KE KG)-323V56100.book 248 ページ ２０２４年１０月７日 月曜日 午後１時３７分
To Next Page
Loading...
