249
uuOperating the Switches Around the Steering WheeluAdaptive Driving Beam
*
Continued
Adaptive Driving Beam
*
When driving at night, the front wide view
camera detects light sources such as street
lights or the lights of an oncoming or
preceding vehicle. The system automatically
switches the headlights between low and high
beam depending on the situation.
In addition, the system automatically adjusts
the light distribution of the high beams in
order to reduce glare for preceding and
oncoming vehicles.
The system also increases the coverage of the
low beams when the low beams are on and
the vehicle speed is 40 km/h or less, improving
visibility to the left and right.
1Adaptive Driving Beam
*
The adaptive driving beam system does not always
operate in every situation. This system is just for
assisting the driver. Always observe your
surroundings and manually switch the headlights
between high beam and low beam if necessary.
The range and the distance at which the camera can
recognise light sources varies depending on
conditions surrounding your vehicle.
Regarding the handling of the camera mounted to
the inside of the windscreen, refer to the following.
2 Front Wide View Camera P. 575
For the adaptive driving beam to work properly:
• Do not place an object that reflects light on the
dashboard.
• Keep the windscreen around the camera clean.
When cleaning the windscreen, be careful not to
apply the windscreen cleanser to the camera lens.
• Do not attach an object, sticker, or film to the area
around the camera.
• Do not touch the camera lens.
If the camera receives a strong impact, or repairing of
the area near the camera is required, consult a dealer.
* Not available on all models
25 ZR-V HEV GHAC (KE KG)-323V56100.book 249 ページ ２０２４年１０月７日 月曜日 午後１時３７分
To Next Page
Loading...
