252
uuOperating the Switches Around the Steering WheeluAdaptive Driving Beam
*
■
Manual switching between high-beam and low-beam
If you want to manually switch the headlights between high beam and low beam,
follow either of the procedure below. Note that when you do this, the adaptive
driving beam indicator will turn off and the adaptive driving beam will be
deactivated.
Using the lever:
Pull the lever towards you for flashing the high beams then release it.
u To reactivate the adaptive driving beam, follow either of the procedures below
and the adaptive driving beam indicator will come on.
• Pull the lever towards you and release it.
• Turn the light switch to and then to AUTO when the lever is in the low beam
position.
Using the light switch:
Turn the light switch to .
u To reactivate the adaptive driving beam, turn the light switch to AUTO when
the lever is in the low beam position, and the adaptive driving beam indicator
will come on.
25 ZR-V HEV GHAC (KE KG)-323V56100.book 252 ページ ２０２４年１０月７日 月曜日 午後１時３７分
To Next Page
Loading...
