EasyManua.ls Logo

Honeywell Home HM600XROF1/U User Manual

Honeywell Home HM600XROF1/U
20 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
REVERSE OSMOSIS FILTRATION SYSTEM
HM600XROF1/U
Safety Guides
Installation
Operation
Maintenance
Printed in U.S.A.
201-8402800 (Rev. 00 12/2019)
M35375
69-2379EF-04

Questions and Answers:

Honeywell Home HM600XROF1/U Specifications

General IconGeneral
BrandHoneywell Home
ModelHM600XROF1/U
CategoryWater Filtration Systems
LanguageEnglish

Summary

Safety and Compliance Guidance

General Safety Instructions

Read, understand, and follow all guides and requirements before installing the RO filtration system.

Plumbing and Code Adherence

Ensure all water connections comply with local and state plumbing and sanitation codes.

Operational Environment Restrictions

Do not install on hot water supply; use only cold water and avoid freezing conditions.

RO System Installation

System Mounting and Location

Select a stable location capable of holding 7 lbs and properly mount the RO system assembly.

Filter Cartridge Connection Sequence

Connect filter cartridges #3, #2, and #1 sequentially to the RO system assembly, ensuring a tight seal.

Plumbing and RO System Setup

Reject Water Drain Requirements

Follow local codes for drain installation and consult the humidifier manual for specific requirements.

Tubing and Fitting Installation

Install adapter elbow, verify plug, and push tubing securely into fittings for proper connections.

Post-Installation Leak Verification

Check all water tube connections for leaks after installation and during initial operation.

RO System Operation Details

Component Functionality Overview

Explains the role of the RO assembly, sediment filter, RO cartridge, and staging tank in water filtration.

Initial System Startup Notes

Normal operational sounds may occur initially due to air purging from the system.

RO System Maintenance Guide

Water Filter Replacement Schedule

Replace sediment (#1) and RO (#2) filters seasonally. Empty staging tank (#3) water at season's end.

Filter Installation and Flow Control

Install new filters in order (#2 then #1) and ensure the flow control is clean and unrestricted.

Troubleshooting Common Problems

Humidifier Fault Code Analysis

Identifies humidifier service light blink codes, their causes, and recommended corrective actions.

Maintenance Parts Information

Filter and Kit Part Identification

Lists specific part numbers for individual filters (#1, #2, #3) and filter kits.