Honeywell 013080 - 6 Overview; Front View and LED Indication; Rear View

6. Overview
6.1 Front view and LED indication
LED red (Symbol bell)
Lights up: Intrusion alarm
Flashes: Tamper- or hold-up alarm
LED yellow (Symbol info)
Lights up: General fault of the panel
Flashes: Mains fault of the control panel
(not MB-Secure).
DUO LED green/blue (Symbol hook)
Lights up green: Unit is ready
Flashes green:Unit is not ready
Short flash blue: Reading data carrier
6.2 Rear view
BUS-2
Connection 2
BUS-2
Connection 1
Slot for
Micro-SD-
memory card
(max. 16 GB)
The SD memory card is accessible only when the isMicro- TouchScreen
removed.
Reading range
Cover contact
Loudspeaker
Contact for tear-off protection
Antenna for card reader
Reader module
- IK2/proX1
- IK3/proX2
- mifare
- mifare DESFire EV1/EV2
Shield
A/BUS-2
B
GND
12VDC
Shield
A/BUS-2
B
GND
12VDC
Jumper
position 2-3
123
Connections
do not wire!
17
Mounting and Connection Instructions MB TouchScreen ControlPanel