Honeywell 04230-A-1001 - Page 100

100
MAN0530 Issue 15 - 07/17 Searchline Excel
2104M0506
Reset Occurred ERR_EXCEL_RESET A gas detector reset has occurred.
Time Adjusted ERR_EXCEL_LOG_TIME_ADJUST The Excel log time has been changed.
Uncalibrated ERR_EXCEL_UNCALIBRATED The gas detector requires calibration.
Volt Ref Fault ERR_EXCEL_VOLTAGE_REF_FAIL Voltage reference fault detected.
Self Test
This option lets you start a system diagnostic self test.
The following message is displayed during the self test process:
Processing Data
Please Wait
The following message is displayed for three seconds at the end of a successful self test
process.
Checks Passed
Soft Reset
This option lets you reset the system.
This message is displayed during the reset process:
Processing Data
Please Wait
The following message is displayed for three seconds when the process is completed:
Unit Reset
A.5.5 CongMenu
Thissubmenuletsyoucheckthecongurationparametersoftheunitandupdatetheuser
congurationparameters.Ithasthefollowingoptions:
Show Gas Showthegasrelatedcongurationparameters.
 ShowCong Showtheuserrelatedcongurationparameters.
Show Install Showtheinstallationrelatedcongurationparameters.
APPENDIX A - HANDHELD INTERROGATOR