125
MAN0530 Issue 15 - 07/17 Searchline Excel
2104M0506
APPENDIX D - MARINE BRACKET
1 x Bracket R 8 x Washer M6
8 x Spring Washer M6 2 x Socket Cap Screw M6x12
4 x Hex Nut M6 6 x Screw M6x12
D.2.4.2 Mechanical Installation
(1) Fit the sunshade brackets to the sunshade with 4 hexagon screws (M6x12), 4 washers M6,
4 spring washers M6 and 4 hex nuts M6.
(2) Mount 2 hexagon screws (M6x12), 2 washers M6 and 2 spring washers M6 to the mounting
bracket but do not tighten fully.
(3) Mount 2 socket cap screws (M6x12), 2 washers M6 and 2 spring washers M6 to the mounting
bracket but do not tighten fully.
(4) Slide the sunshade brackets onto 2 hexagon screws M6x12 as shown in Installation View 2.
(5) Tilt the sunshade to horizontal position so that sunshade brackets slide onto 2 socket cap
screws M6x12.
(6) Tighten 2 hexagon screws M6x12 and 2 socket cap screws M6x12.
To Next Page
Loading...
