44
MAN0530 Issue 15 - 07/17 Searchline Excel
2104M0506
3.7.5 Commissioning the Gas Detector
This process consists of the following steps:
• Connect the Handheld Interrogator to the gas detector
• Power-up the gas detector and check/set the mode of the Interrogator for
operation with the installed Excel gas detector
• Set the gas detector real-time clock
• Complete the alignment process
• Finish up
Connecting the Interrogator
Connect the SHC1 Handheld Interrogator to the gas detector in one of the following ways:
• via a Honeywell Analytics DX100(M) Junction Box - connect the
Interrogator directly to the junction box via its IS socket, e.g.
ESC
Calibrator
Type SHC1
3. INSTALLATION AND OPERATION
Distant Excel
unit
Cross-hairs
After alignment
To Next Page
Loading...
