EasyManua.ls Logo

Honeywell 1152682-2 - Page 48

Honeywell 1152682-2
104 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
COMPONENT MAINTENANCE MANUAL
1152682
Page 115
Oct 27/06
© Honeywell International Inc. Do not copy without express permission of Honeywell.
23-24-02
17 ELTONPULSE Output Momentary contact closure to ground
gives MASTER CAUTION PULSE at
transmission start.
Optional
18 LIGHT Output Supplies power to the LED on the
remote panel.
Optional
19 EXTERNAL ON Input Used with RESET1 and RESET2 to
sense the position of the remote
panel switch.
Required
20 RESET1 Input Used with EXTERNAL ON and
RESET2 to sense the position of the
remote panel switch.
Required
21 ELTON3 Output Contact closure to ground during
TRANSMIT mode. At other times,
open circuit.
Optional
22 RESET2 Input Used with RESET1 and EXTERNAL
ON to sense the position of the
remote panel switch.
Required
23 BUZZERHI Output Pulsed input to buzzer. Optional
TABLE 103. AIM P/N 1152780-1 CONNECTOR J1 PIN-OUTS
Pin Pin Label (I/O) Description Requirements
1 A/C Address Bit 1 Input Bit 1 info from Aircraft Address Bank
(closure to ground/open circuit)
Optional (used with
24-bit DIP switch
module)
2 A/C Address Bit 2 Input Bit 2 info from Aircraft Address Bank
(closure to ground/open circuit)
Optional (used with
24-bit DIP switch
module)
3 A/C Address Bit 3 Input Bit 3 info from Aircraft Address Bank
(closure to ground/open circuit)
Optional (used with
24-bit DIP switch
module)
4 A/C Address Bit 4 Input Bit 4 info from Aircraft Address Bank
(closure to ground/open circuit)
Optional (used with
24-bit DIP switch
module)
5 A/C Address Bit 5 Input Bit 5 info from Aircraft Address Bank
(closure to ground/open circuit)
Optional (used with
24-bit DIP switch
module)
6 A/C Address Bit 6 Input Bit 6 info from Aircraft Address Bank
(closure to ground/open circuit)
Optional (used with
24-bit DIP switch
module)
7 A/C Address Bit 7 Input Bit 7 info from Aircraft Address Bank
(closure to ground/open circuit)
Optional (used with
24-bit DIP switch
module)
TABLE 102. TRANSMITTER UNIT P/N 1152862-2 CONNECTOR J1 PIN-OUTS (Cont’d)
Pin Pin Label (I/O) Description Requirements

Related product manuals