COMPONENT MAINTENANCE MANUAL
1152682
Page 118
Oct 27/06
© Honeywell International Inc. Do not copy without express permission of Honeywell.
23-24-02
9 GND Aircraft Ground Connection for use with
ARINC connection
Optional
10 RINA Input ARINC 429 Receiver Bus A (HIGH)
11 RINB Input ARINC 429 Receiver Bus B (LOW)
12 GND Ground Connection for use with
BSPEED (J-12)
13 BSPEED Input ARINC BUS Speed Selector. Leave open for 100
KB Connect to
J1-12 to select
12.5 KB
14 GND Ground connection for use with 24-bit
Aircraft Address Switch.
Optional (if NAIM
and the 24-bit DIP
switch module are
both installed)
15 A/C Address Bit 13 Input Allows programming of 24-bit Aircraft
Address by external switch panel. Open
circuit interpreted as zero.
Optional (if NAIM
and the 24-bit DIP
switch module are
both installed)
16 A/C Address Bit 19 Input Allows programming of 24-bit Aircraft
Address by external switch panel. Open
circuit interpreted as zero.
Optional (if AIM
and the 24-bit DIP
switch module are
both installed)
17 A/C Address Bit 22 Input Allows programming of 24-bit Aircraft
Address by external switch panel. Open
circuit interpreted as zero.
Optional (if NAIM
and the 24-bit DIP
switch module are
both installed)
18 A/C Address Bit 23 Input Allows programming of 24-bit Aircraft
Address by external switch panel. Open
circuit interpreted as zero.
Optional (if NAIM
and the 24-bit DIP
switch module are
both installed)
19 A/C Address Bit 17 Input Allows programming of 24-bit Aircraft
Address by external switch panel. Open
circuit interpreted as zero.
Optional (if NAIM
and the 24-bit DIP
switch module are
both installed)
20 A/C Address Bit 21 Input Allows programming of 24-bit Aircraft
Address by external switch panel. Open
circuit interpreted as zero.
Optional (if NAIM
and the 24-bit DIP
switch module are
both installed)
21 A/C Address Bit 20 Input Allows programming of 24-bit Aircraft
Address by external switch panel. Open
circuit interpreted as zero.
Optional (if NAIM
and the 24-bit DIP
switch module are
both installed)
TABLE 104. NAIM P/N 1153396-1 CONNECTOR J1 PIN-OUTS (Cont’d)
Pin Pin Label (I/O) Description Requirements
To Next Page
Loading...
