Honeywell 1152682-2 - Page 52

COMPONENT MAINTENANCE MANUAL
1152682
Page 119
Oct 27/06
© Honeywell International Inc. Do not copy without express permission of Honeywell.
23-24-02
22 A/C Address Bit 12 Input Allows programming of 24-bit Aircraft
Address by external switch panel. Open
circuit interpreted as zero.
Optional (if NAIM
and the 24-bit DIP
switch module are
both installed)
23 A/C Address Bit 7 Input Allows programming of 24-bit Aircraft
Address by external switch panel. Open
circuit interpreted as zero.
Optional (if NAIM
and the 24-bit DIP
switch module are
both installed)
24 A/C Address Bit 3 Input Allows programming of 24-bit Aircraft
Address by external switch panel. Open
circuit interpreted as zero.
Optional (if NAIM
and the 24-bit DIP
switch module are
both installed)
25 A/C Address Bit 2 Input Allows programming of 24-bit Aircraft
Address by external switch panel. Open
circuit interpreted as zero.
Optional (if NAIM
and the 24-bit DIP
switch module are
both installed)
26 A/C Address Bit 1 Input Allows programming of 24-bit Aircraft
Address by external switch panel. Open
circuit interpreted as zero.
Optional (if NAIM
and the 24-bit DIP
switch module are
both installed)
27 A/C Address Bit 4 Input Allows programming of 24-bit Aircraft
Address by external switch panel. Open
circuit interpreted as zero.
Optional (if NAIM
and the 24-bit DIP
switch module are
both installed)
28 A/C Address Bit 8 Input Allows programming of 24-bit Aircraft
Address by external switch panel. Open
circuit interpreted as zero.
Optional (if NAIM
and the 24-bit DIP
switch module are
both installed)
29 A/C Address Bit 14 Input Allows programming of 24-bit Aircraft
Address by external switch panel. Open
circuit interpreted as zero.
Optional (if NAIM
and the 24-bit DIP
switch module are
both installed)
30 A/C Address Bit 18 Input Allows programming of 24-bit Aircraft
Address by external switch panel. Open
circuit interpreted as zero.
Optional (if NAIM
and the 24-bit DIP
switch module are
both installed)
31 A/C Address Bit 16 Input Allows programming of 24-bit Aircraft
Address by external switch panel. Open
circuit interpreted as zero.
Optional (if NAIM
and the 24-bit DIP
switch module are
both installed)
32 A/C Address Bit 11 Input Allows programming of 24-bit Aircraft
Address by external switch panel. Open
circuit interpreted as zero.
Optional (if AIM
and the 24-bit DIP
switch module are
both installed)
TABLE 104. NAIM P/N 1153396-1 CONNECTOR J1 PIN-OUTS (Cont’d)
Pin Pin Label (I/O) Description Requirements