COMPONENT MAINTENANCE MANUAL
1152682
Page 122
Oct 27/06
© Honeywell International Inc. Do not copy without express permission of Honeywell.
23-24-02
B. The Fault Isolation is made up of three separate troubleshooting flow charts. Each chart shows
one of three possible configurations of the system:
• Configuration No. 1 – Transmitter Unit and Remote Panel
• Configuration No. 2 – Transmitter Unit, Remote Panel and AIM or NAIM
• Configuration No. 3 – Transmitter Unit, Remote Panel, AIM or NAIM and 24-bit DIP switch
module
To Next Page
Loading...
