COMPONENT MAINTENANCE MANUAL
1152682
Page 503/504
Oct 27/06
© Honeywell International Inc. Do not copy without express permission of Honeywell.
23-24-02
F. Connectors
(1) Visually inspect the connectors on the ends of the various cables for any form of damage
or deterioration. Pay special attention to the area where the connector is joined/crimped to
the cable to ensure that the insulation has not detached from the connector, leaving the
underlying wiring exposed.
(2) Make sure that each connector is firmly secured to its mating connector.
To Next Page
Loading...
