4 - 55
Bookland ISBN Format
Select one of the following formats for Bookland data when Bookland EAN is enabled.
Bookland ISBN-10
The scanner reports Bookland data starting with 978 in traditional 10-digit format with the special Bookland check digit
for backward-compatibility. Data starting with 979 is not considered Bookland in this mode.
Bookland ISBN-13
The scanner reports Bookland data (starting with either 978 or 979) as EAN-13 in 13-digit format to meet the 2007
ISBN-13 protocol.
For Bookland EAN to function properly, first enable Bookland EAN using Enable/Disable Bookland EAN, then select
either Decode UPC/EAN Supplementals, Autodiscriminate UPC/EAN Supplementals, or Enable 978/979 Supplemen-
tal Mode in Decode UPC/EAN Supplementals.
Check Digits
Transmit UPC-A Check Digit
This parameter determines whether the symbol will be transmitted with or without the UPC-A check digit. Select
an option by scanning either of the bar codes shown below.
* Bookland ISBN-10
Bookland ISBN-13
* Enable Transmit UPC-A Check Digit
Disable Transmit UPC-A Check Digit
To Next Page
Loading...
