Honeywell 8650 - Any Length; Code 39 Check Digit Verification

5 - 43
Any Length
This option decodes Code 39 bar codes containing any number of characters.
To set any length, scan this Any Length bar code:
Code 39 Check Digit Verification
When enabled, this parameter checks the integrity of a Code 39 symbol to ensure it complies with specified check digit
algorithms.
Only Code 39 symbols which include a Modulo 43 check digit are decoded when this parameter is enabled.
When Transmit Code 39 Check Digit is enabled, this parameter must be enabled too.
Enable this feature if the code 39 bar codes contain a Modulo 43 check digit.
Set this parameter by scanning either of the bar codes shown below.
Enable Code 39 Check Digit Verification
* Disable Code 39 Check Digit Verification