56
Configuring Presets, Tours, Privacy Zones, and Sectors
Setting Preset Auto Focus
You can turn auto focus on or off for presets.
To enable/disable preset auto focus:
• Select 3 Control Options
8 Preset Auto Focus ON or OFF (default).
Note Preset tour auto focus is turned on automatically when preset auto
focus is turned on. Preset tour auto focus cannot be turned off while
preset auto focus is on.
Viewing a List of Presets
You can view a list of all of the presets programmed for the dome.
You can organize the list of presets by name or by type (normal or advanced).
To list presets by name:
• Select 6 Function Programming
4 List PS/PT/Sectors 1 Presets.
To list presets by type:
• Select 6 Function Programming
4 List PS/PT/Sectors 4 Preset
Type.
Deleting a Preset
You can delete a preset that you have programmed.
Using MAXPRO-mode/VCL/VCL UTP/Pelco P/Pelco D protocol:
1. Select 6 Function Programming
7 Delete PS/PT/MT/ Sectors.
2. Locate and select the preset you want to delete. If the deletion is
successful, the message
Delete Success appears.
Using Diamond/IntelliBus protocol:
• Go to the Program menu and delete the preset.
To Next Page
Loading...
