Honeywell BC-200 - Field Module Connection Diagrams; AZM-8 Module Diagram

Appendix
BC-200 Manual – P/N DOC-01-013 129
9.10 FIELD MODULE CONNECTION DIAGRAMS
9
9
.
.
1
1
0
0
.
.
1
1
A
A
Z
Z
M
M
-
-
8
8
ZONE1 DETECTORS
ZONE2 DETECTORS
ZONE3 DETECTORS
ZONE4 DETECTORS
ZONE5 DETECTORS
ZONE8 DETECTORS
UNUSEDINPUTS
4K7 RESISTOR
4K7 RESISTOR
+IN
-IN
+OUT
-OUT
SHIELD
COMMS CABLE FROM
PREVIOUS MODULE
COMMS CABLE TO
NEXT MODULE
SOCKET
OUTPUT FUNCTION 1
OUTPUT FUNCTION 2
OUTPUT FUNCTION 3
OUTPUT FUNCTION 4
+24V From Previous Module
0V From Previous Module
+24V To Next Module
0V To Next Module
Note: Between Field modules, connect shields together outside of their respective enclosures. Make sure that the shield is only grounded at the FIP and not at the modules or
annunciators.