Honeywell BW MaxXT II - Listed Replacement Parts; Sensors, Regulators, and Calibration Gases

CHAPTER
10
Replacement Parts and Accessories
WARNING
To avoid personal injury or damage to the detector, use only the specified replacement parts.
To order parts or accessories listed in the following table, contact BW Technologies by
Honeywell.
Replacement Parts and Accessories
Model No. Description Qty
SR-WMC75C Combustible (LEL) sensor 1
SR-X10-C1 Oxygen (O
2
) sensor 1
SR-M-MC Carbon monoxide (CO) sensor 1
SR-H-MC Hydrogen sulfide (H
2
S) sensor 1
REG-DF-1 Demand flow regulator 1
REG-0.5 0.5 l/min regulator 1
CG-Q58-4
Quad gas cylinder: CH
4
-2.5%, O
2
-18.0%, H
2
S- 25 ppm, CO-100 ppm,
bal. N
2
(58 l)
1
CG-Q34-4
Quad gas cylinder: CH
4
-2.5%, O
2
-18.0%, H
2
S- 25 ppm, CO-100 ppm,
bal. N
2
(34 l)
1
CG-T34 Dual gas cylinder: 50% LEL (CH
4
-2.5%) O
2
- 20.9%, bal. N
2
(34 l) 1
G0042-H25 Single gas cylinder: H
2
S 25 ppm, bal. N
2
(58 l) 1
CG2-M-200-
103
Single gas cylinder: CO 200 ppm, bal N
2
(103 l) 1
CG-BUMP1
Bump alarm gas aerosol (CH
4
-2.5%, O
2
-10%, H
2
S-40 ppm, CO-200
ppm)
1
CK-Q34-4
Quad calibration kit with regulator, quad gas cylinder (CG-Q34-4),
hose, and carrying case
1
CK-Q58-4
Quad calibration kit with regulator, quad gas cylinder (CG-Q58-4),
hose, and carrying case
1
XT-SS-1 Sensor filter for BW MaxXT II, Kit of 2 2
BW MaxXT II 102 User Manual