EAGLEHAWK NX CONTROLLER EVERYDAY OPERATIONS
67 EN2Z-1053GE51 R0119
2. Turn the rotate&push button to navigate to and highlight Schedules.
3. Push the rotate&push button. The list of schedules is displayed.
4. Turn the rotate&push button to navigate to and highlight the schedule to
which you want to add switch points.
5. Push the rotate&push button.
The schedule is displayed.
6. Turn the rotate&push button to navigate to and highlight the day.
7. Push the rotate&push button.
The day is displayed.
8. On the controller housing, press the soft key right adjacent to the Add
command symbol
.
The Edit screen is displayed.
9. Set the time and value as described in the "Adjusting and Saving Values and
Options" section, p. 19 and the "Enable/Disabling Options" section, 24.
To Next Page
Loading...
