Honeywell CentraLine EAGLEHAWK NX - Copying Switch Point

EVERYDAY OPERATIONS EAGLEHAWK NX CONTROLLER
EN2Z-1053GE51 R0119 68
10. Turn the rotate&push button to navigate to and highlight the OK command.
11. Push the rotate&push button.
The screen of the day redisplays. The switch point is added and displayed in
the list.
12. Add further switch points in the same way.
Copying Switch Point
Purpose Copy a switch point from one day to other days.
Procedure
1. On the controller housing, press the Time Program operating key
. The
TIME PROGRAMS menu displays.
2. Turn the rotate&push button to navigate to and highlight Schedules.
3. Push the rotate&push button. The list of schedules is displayed.
4. Turn the rotate&push button to navigate to and highlight the schedule in
which you want to copy switch points.
5. Push the rotate&push button.
The schedule is displayed.