EVERYDAY OPERATIONS EAGLEHAWK NX CONTROLLER
EN2Z-1053GE51 R0119 70
2. Turn the rotate&push button to navigate to and highlight Schedules.
3. Push the rotate&push button. The list of schedules is displayed.
4. Turn the rotate&push button to navigate to and highlight the schedule to
which you want to add switch points.
5. Push the rotate&push button.
The schedule is displayed.
6. Turn the rotate&push button to navigate to and highlight the day.
7. Push the rotate&push button.
The day with its switch points is displayed.
8. Turn the rotate&push button to navigate to and highlight the switch point you
want to edit.
9. Push the rotate&push button.
The Edit screen is displayed.
10. Set the time and value as described in the "Adjusting and Saving Values and
Options" and the "Enable/Disabling Options" sections.
To Next Page
Loading...
