Honeywell Centraline LION - Mounting;Dismounting Cross Connectors; Mounting;Dismounting Swivel Label Holders

LION System Mounting/Dismounting Modules
21 EN1Z-0921GE51 R0315
Mounting/Dismounting Cross Connectors
NOTE: The cross connector (incl. in the delivery) can be
mounted to the XS824-25 or XSU824-25, as
required. It can be dismounted (see Fig. 28). It is
not permitted to replace cross connectors with
wire.
► Insert a screwdriver on one end of the cross connector
and swivel it to the right and to the left.
► Insert a screwdriver on the other end of the cross
connecter and swivel it to the right and to left until the
cross connector is released.
► If desired, insert another cross connector.
Fig. 28 Dismounting the cross connectors
Mounting/Dismounting Swivel Label
Holders
NOTE: A swivel label holder is included in the delivery of
each module.
Use only the (short / long) swivel label holders appropriate
for the given type (pluggable or mixed, respectively) of I/O
module.
Mounting Swivel Label Holders
► Snap the swivel label holder onto the hinges of the
terminal socket / mixed I/O module.
► Apply self-adhesive labels to the holders.
Fig. 29 Mounting the swivel label holder
Dismounting Swivel Label Holders
► Press the hinges together and remove the swivel label
holder.