Honeywell CIPer 50 - WEBs N4 Driver Compatibility

WEBs CIPer MODEL 50 – USER GUIDE
31-00198—01 28
WEBs N4 Driver compatibility
Supported Drivers
Protocol
Default Port
NOTE: For Cyber Security
reasons, all ports ranging 1024 or
lower cannot be used for services
on the device.
Hardware Interface(s)
Platform Daemon
3011
Ethernet RJ45, IP via USB-B
Platform Daemon SSL
5011
Ethernet RJ45, IP via USB-B
Station (FOX)
1911
Ethernet RJ45, IP via USB-B
Station Secure (FOXS)
4911
Ethernet RJ45, IP via USB-B
HTTP *
80
Ethernet RJ45, IP via USB-B
BACnet/IP
47808
Ethernet RJ45
Email alarming, SMTP
25, 587 (check Email provider)
Ethernet RJ45
TCP/IP
N/A
Ethernet RJ45, IP via USB-B
SSH
N/A
Not supported
SNMP
10161, 10162
Ethernet RJ45
SMS
Check SMS provider
Ethernet RJ45
MQTT
1883
Ethernet RJ45
MQTT Secure
8883
Ethernet RJ45
KNX EIBnet/IP
3671
Ethernet RJ45
LON IP
2540, 2541
Ethernet RJ45
Modbus TCP
502
Ethernet RJ45
oBIX
80 or 8443
Ethernet RJ45
Open ADR
Check customer System Admin
(e.g. 80, 8443, 5222, 5223, 5269,
5280)
Ethernet RJ45
EnOcean
Check customer System Admin
Ethernet RJ45
Fidelio FIAS MICROS protocol
Check customer System Admin
Ethernet RJ45
C-Bus Driver (SUSI)
2499
Ethernet RJ45
BACnet MSTP
N/A
RS485-1, RS485-2
Panel-Bus
N/A
RS485-1, RS485-2
Modbus RTU/ASCII Master
N/A
RS485-1, RS485-2
Modbus RTU/ASCII Slave
N/A
RS485-1, RS485-2
M-Bus
N/A
RS232 plus PW3/20/60
* Information on HTTP and HTTPS ports:
WEBs N4 Version N4.4.93.40.8 includes a template which automatically changes these two ports
to 8080 (HTTP) and 8443 (HTTPS), when creating a new station.
Un-supported Drivers
Protocol
Hardware Interface(s)
CCTV
Not supported for performance reasons.
Ethernet RJ45
SMS
The Niagara framework does not support this protocol on N4.
RS232 plus modem
RdbmsNetwork
Ethernet RJ45
Drivers not tested
Protocol
Hardware Interface(s)
Other drivers than listed under “Supported Drivers” and “Un-
supported Drivers” may well work but have not been tested.
Ethernet RJ45