WEBs CIPer Model 50 – USER GUIDE
5 31-00198—01
HMI service
The onboard and detached HMI will only work when the HMI Service, called
“HonEagleHawkHmiService” has been placed into “Services” of your station.
Important:
Always place the “HonEagleHawkHmiService” into the “Services” folder.
Do NOT place it under any service within “Services”.
Step 1:
Select the “honEagleHawkHMI” palette and drag the “HonEagleHawkHmiService” into “Services” of
your station.
To Next Page
Loading...
