Honeywell CIU 888 - Page 104

Getting Started
Part No.: 4417584_Rev12 Configuration Manual
CIU 888 3 - 74
$*6
14.Click the Units of Measurement tab, the Properties detail appears.
You can view or edit these properties:
NOTE: Make sure that Gauge Units of Measurement matches with the Units of
Measurement configured in the gauge. Default gauge Units of Measurement
are based on the configured global Units of Measurement.
TABLE 3-1 Special Characters
Properties Description
Level Select m, mm, ft, in, in/16, fis, or 1/256 in.
Temperature Select °C or °F
Vapour Pressure Select kgf/cm
2
, Pa, kPa, psi, psi_r100, or psi_r1000
Water Select m, mm, ft, in, in/16, fis, or 1/256 in.
Density Select kg/m
3
, °API, lbs/ft
3
, RD60, or lbs/US gal.
Vapour Temperature Select °C or °F
Product Pressure Select kgf/cm
2
, Pa, kPa, psi, psi_r100, or psi_r1000
Special Characters Description
TOI A = 802/812 gauge.
B = 811 gauge with GPU protocol and devices with
gauge type=B.
C = 813 MGT and devices with gauge type=C.
E = 811 gauge with external alarms and devices with
gauge type=E.
M = 816 /818.