Honeywell CIU 888 - Page 120

Getting Started
Part No.: 4417584_Rev12 Configuration Manual
CIU 888 3 - 90
$*6
3.2.12.3 User defined modbus map - Profiles
This section helps the user to configure the Temperature Profiles
Modbus area in CIU 888.
The configurable Temperature Profile fields and a brief description on
each of them are given in the following table.
Click this button to move the selected entity in the
‘Selected entities’ to the ‘Available Entities’.
Click this button to move the selected entity in the
‘Selected entities’ one position up.
. Click this button to move the selected entity in the
‘Selected entities’ one position down.
Click this button to select ‘Entis Pro’ compliant entities
in 'Selected entities'.
Definitions
Entity ID Entity ID number
Entity Name Name of the Entity
Type Modbus data type of the entity.
Size Number of Modbus registers
Scale Scaling factor
Offset Offset value
Fields Description
Temperature Profile
Absolute Start address
This indicates the absolute start address of the tem-
perature profiles record.
Values are in decimal. Default value is 20000. Configu-
rable when modbus mapping is User Specified.
Temperature Profile
Record Interval
This indicates the record interval of the temperature
profiles record.
Values are in decimal. Default value is 125. Configu-
rable when modbus mapping is User Specified.
Properties Description