Getting Started
Part No.: 4417584_Rev12 Configuration Manual
CIU 888 3 - 94
2. By default, FTE tab appears displaying various properties.
You can view or edit these properties.
Parameters Configuration options
Device name This indicates the device name of the Ethernet port.
IP Address IP address of the corresponding Ethernet port in the
CIU.
Format: a.b.c.d
Example: 10.70.100.101
Subnet Mask Subnet mask of the corresponding Ethernet port in the
CIU. In case of redundant CIUs, this also indicates the
Subnet mask of the corresponding Ethernet port in the
partner CIU.
Format: e.f.g.h
Example: 255.255.255.0
Default Gateway Default Gateway of the corresponding Ethernet port in
the CIU. In case of redundant CIUs, this also indicates
the default gateway of the corresponding Ethernet port
in the partner CIU.
Format: i.j.k.l
Example: 10.79.100.1
Note: If no gateway is required, then this setting can be
left blank.
To Next Page
Loading...
