Honeywell CIU 888 - Page 183

General CIU 888 Functions
Part No.: 4417584_Rev12 Configuration Manual
CIU 888 7 - 5
$*6
On the CIU 888 display, the status of the W&M lock key switch
changes from (‘locked’) to (‘unlocked’) (see FIGURE 7-7).
FIGURE 7-7 CIU 888 display: W&M relevant configuration settings are unlocked
3. Remove the key from the key switch and store it.
7.2.1.2 Locking the LM relevant configuration settings
Perform the following steps to lock the W&M relevant configuration
settings of the CIU 888:
1. Take the key for locking/unlocking the W&M relevant configuration
settings.
2. Insert the key in the W&M lock key switch. Then, turn the key
clockwise.
On the CIU 888 display, the status of the W&M lock key switch
changes from (‘unlocked’) to (‘locked’) (see FIGURE 7-8).
FIGURE 7-8 CIU 888 display: W&M relevant configuration settings are locked