Getting Started
Part No.: 4417584_Rev12 Configuration Manual
CIU 888 3 - 48
You can add a new Tank Capacity Table or view an existing one.
17.On the Tank1 node, right-click and choose Add Water Tank
Capacity Table
The following window appears.
You can add a new Water Tank Capacity Table or view an existing one.
Properties Description
Tank Capacity Table Refer to Appendix D for the format of Tank Capacity
Table.
Browse Click ‘Browse’ to select a tank capacity table. Selected
file is copied to the data environment of the selected
site (C:\Users\Public\Documents\Honeywell\CIU 888
Service Tool\SiteDatabase\<sitename>\STR.
The copied file gets the name [Tank name].txt.
View Click ‘View’ to view the tank capacity table.
Note: A selected tank capacity table file is only accepted if the used engineering
units match the global selected engineering units of the site configuration.
Properties Description
Water Tank Capacity
Table
Refer to Appendix D for the format of Water Tank
Capacity Table.
To Next Page
Loading...
