64 75 Series Mobile Computer User Guide
6. Enter the proxy settings for the network.
7. Tap Save.
Disable Wi-Fi Notifications
By default, when Wi-Fi is enabled, you receive notifications in the Status bar when
the computer discovers a wireless network. You can disable these notifications.
1. Tap All Apps > Settings > Wi-Fi.
2. Tap , and then select Advanced.
3. Tap the Network notification switch to disable notifications.
Connect to an Ethernet Network
To connect the computer to an Ethernet network, you need an Ethernet dock.
1. Make sure the dock is connected to your Ethernet network.
2. Place the computer in the dock.
3. Tap All Apps > Settings > Ethernet.
4. Verify Ethernet is On .
5. Tap Ethernet. The Ethernet list shows the name of the current Ethernet
connection. By default, the computer assumes a DHCP connection, and that
your network has assigned an IP address automatically. If DHCP is working, the
Ethernet dock should indicate that communication with the network is
occurring.
6. (Optional) To assign a static IP address.
a. Tap the connection name (for example, eth0).
b. Tap DHCP and then select Static from the list.
c. Enter the required network information, and then tap Apply.
How to Connect to Virtual Private Networks
The computer supports connecting to virtual private networks (VPNs). This section
describes how to add and connect to VPNs. To configure VPN access, you must
obtain details from your network administrator.
You manage VPN connections in the Settings app.
Note: Before you can add or connect to a VPN network, you must enable a screen lock
method.
To Next Page
Loading...
