16
TROUBLESHOOTING GUIDE
No discharge of air Cord is not plugged in.
Make sure power cord is plugged
in and the supply switch is on.
Power is not on. Turn the unit ON by pressing
button on the control panel.
Not Cooling / Unit is
making noise
Pump is not turned ON.
On Control Panel, turn COOL
FUNCTION to “ON”.
Low or no water in tank,
when COOL is selected.
Refill water tank.
Odors When the Cooler is new.
If the Cooler has been used.
Damaged Pump or Calcium
deposits on blower.
Contact service center.
Problem Possible Cause Solution
When the unit is used for the
first time, the Honeycomb
Cooling Media will have an
odor, which will dissipate within
a few hours of initial use.
There may be an algae issue.
Replace the Honeycomb
Cooling Media.
To Next Page
Loading...
Need help?
General
