8 - 7
After the installation on the terminal is complete, tap
.
The program and its icon appears on the screen. Tap the
icon to run the program.
Adding Programs Directly from the Internet
When selecting programs, verify that the program and version of the program are designed for Windows Mobile and the termi-
nal’s processor.
Perform the following:
1. Choose the version of the software that is designed for the specific device and processor. The processor can be verified by
tapping on
> Settings> System> About > Version tab. Make a note of the information in the Processor field.
2. Download the program to the terminal from the Internet, using Internet Explorer Mobile. It can be a single setup.exe, EXE,
CAB or DLL-file or several files for different types of terminals and processors.
3. Many programs provide special installation instructions. Read the installation instructions in Read Me files or documentation
that comes with the program.
4. Tap the file, such as an EXE file. The installation wizard begins. Follow the directions on the screen.
COM Port Assignment Table
COM Port Description
COM0 Not accessible
COM1 GPS
COM2 Bluetooth
COM3 Serial Port: RS232 Connector on the bottom panel
COM4 Unused
COM5 Unused
COM6 Unused
COM7 Unused
COM8 Unused
COM9 BT BTHATCI server
To Next Page
Loading...
