Honeywell DOLPHIN 6100 - Wall Mounting

10 - 8
3. Then, using the appropriate nuts and bolts, secure the DIN Rail to a stable, flat horizontal surface.
Wall Mounting
The optional wall mount bracket enables secure mounting of the base on a vertical surface. The wall
mount bracket can be used in conjunction with the DIN rail but does not require the DIN Rail for use.
Hardware (Provided)
• M3 x 9 mm self-tapping screws, #2 Phillips, Qty. 4
• 3/8 in. x 4 in. round head toggle bolt, 2-5/8 in. usable length, Qty. 4
• 3/8 in. x 2 1/2 in. length Hex Head Lag Screw, Qty. 4
Tools Required
•Drill
• 7/8 in. Drill Bit (for hollow wall installations) or
1/4 in. Drill Bit (for wood stud installation)
• Phillips Screw Driver
Hollow Wall Installation
1. Drill four pilot holes in the wall using a 7/8 in. drill bit.
DIN Rail (7.5 X 35 mm)
Wall Mount Holes
6.5 in.
[16.5 cm]
13.78 in.
[ 35 cm ]
Wall Mount Bracket