7 - 13
Note: When the terminal “powers off”, it enters Suspend Mode (see page 3-16).
Regional Settings
Regional Settings enables you to customize the appearance and formatting to your geographic region.
Specifically, you can customize numbers (i.e., number of decimal places allowed), currency (i.e.,using
the $ or
€
€ symbol), time, and date. These specifications apply to all screens, including the Home screen.
The Region tab displays an overview of the region selected in the drop-down list at the top.
The terminal is loaded with a number of pre-programmed regional settings. Select one from the list and
the results appear on the screen. To see specific settings or to change a specific setting, tap on one of
the tabs, make the change, and tap OK to save it.
CPU Power
Setting Tab
Allows you to configure the CPU power setting to extend the
battery life or to increase the CPU performance.
Choose either Auto Power or Manual Power. Selecting Manual
Power allows for either 104, 416, or 624 MHZ. The CPU
operates at or above the selected frequency depending on the
terminal’s state.
Wakeup Source
Tab
Determines when the terminal wakes up. You may select the
incidences when the terminal wakes by checking the
appropriate box.
To Next Page
Loading...
