3 - 1
3
Hardware Overview
Standard Terminal Configurations
Dolphin Peripherals/Accessories for the Dolphin 6110
The following items are sold separately and enhance your Dolphin 6110’s capabilities.
Dolphin HomeBase
™
Device
This charging and communication cradle supports USB and RS-232 communication, enabling your
terminal to interface with the majority of enterprise systems. When a terminal is seated in a powered base,
its battery pack charges in an average of 7 1/2 hours for a fully depleted battery. It takes less time if the
battery has some charge.
This device also contains an auxiliary battery well that charges a spare battery.
For more information, see Dolphin HomeBase (Model 6100-HB)/eBase (Model 6100-EHB) Device on
page 10-1.
Dolphin eBase
™
Device
The Dolphin eBase is used to charge the battery and can be used to communicate data from the terminal
to a PC/laptop via the Ethernet port.
This device also contains an auxiliary battery well that charges a spare battery.
For more information, see Dolphin HomeBase (Model 6100-HB)/eBase (Model 6100-EHB) Device on
page 10-1.
Dolphin QuadCharger
™
Device
The Dolphin QuadCharger device, a four-slot charging station for Dolphin Li-Ion battery packs, can
charge each battery in an average of 7 1/2 hours for a fully depleted battery. It takes less time if the
battery has some charge.
For more information, see Dolphin QuadCharger Device on page 13-1.
Dolphin 6110 WPAN/WLAN
• Microsoft Windows Embedded Handheld 6.5
Classic
• TI OMAP37xx 800MHz
• 512 MB RAM X 512 MB Flash Memory
• 28-key shifted alpha numeric keypad
• 240x320. 262.144 Color Transmissive TFT
Display
• Standard Capacity: Li-ion battery: 3.7V /
2200mAh / 8.1 Wh or Extended Capacity: Li-ion
battery: 3.7V / 3300mAh / 12.2 Wh
• 56XX image engine with laser aiming or N4313-
TTL laser engine
• (WPAN/WLAN) - Bluetooth and 802.11a/b/g/n
radio
• Dolphin power cable (included with each
Dolphin 6110)
To Next Page
Loading...
