8 - 3
Connections Menu
The Connections system setting provides access to the terminal’s various wireless communication
options.
Note: All server-assigned IP addresses use Dynamic Host Configuration Protocol (DHCP).
Receiving Data
The Beam Setting must be set to receive all incoming beams from other infrared devices.
Icon Tapping this icon…
Beam Enables infrared communications. See Receiving Data on page 8-3.
Connections Opens Microsoft’s connections manager. See Receiving Data on page 8-3.
Domain
Enroll
Opens the Enrollment screen for connecting your phone with company resources.
Note: System administrator password is required for domain enrollment.
USB to PC Enables advanced wired USB to PC communication via sync software. See
Connecting and Synchronizing the Terminal and Workstation on page 8-9.
Network
Cards
Manage Network card settings.
To Next Page
Loading...
