3 - 17
Troubleshooting Suspend/Resume
If the terminal does not wake when you press the Power button on the 28-key Dolphin 6500 or press the
Blue then Z (Power) keys on the 52-key Dolphin 6500, the main battery might be too low to resume
operation. To check, remove the battery and install a fully charged battery or connect the terminal to a
Dolphin charging peripheral.
Care and Cleaning of the Dolphin Terminal
When needed, clean the image engine window and the LCD display with a clean, non-abrasive, lint-free
cloth. The terminal can be cleaned with a damp cloth.
To Next Page
Loading...
