Remove the Battery
1. Power Off the terminal.
2. Perform the steps illustrated below to remove the battery.
Install a Memory Card
Note: Format microSD/SDHC card before initial use.
1. Power Off the terminal.
2. Unlock and remove the
battery door.
3. Pull the battery latch back
and remove the battery.
4. Lift the card retention flap.
5. Slide the card (contacts facing
down) into the socket, and
then close the retention flap.
6. Install the battery and
battery door, and then
engage the lock.
7. Press the Power button .
To Next Page
Loading...
