To move files between your terminal and computer without using the an app:
1. Connect the terminal to the computer using the USB charge/
communication cable.
2. Depending on the Windows operating system either open File Explorer
or Windows Explorer.
3. Under Computer, click on Windows Embedded Handheld > Phone.
4. You can copy, delete and/or move files or folders between the PC and
the terminal or the microSD card installed in the terminal as you would
with any other storage drive (e.g., cut and paste or drag and drop).
Restart the Terminal
You may need to restart the terminal to correct conditions where an applica-
tion stops responding to the system or the terminal seems to be locked up.
• Press and hold the Power button . When the message, “slide down to
power off” appears, release the button and swipe down toward the bottom
of the screen. Press the Power button to turn the terminal back on.
To perform a restart if the touch panel display is unresponsive:
• Press and hold the Power button down for approximately 13 seconds.
The terminal automatically restarts.
Reset the Terminal
For information on how to perform at Factory Reset (Clean Boot), see the
user’s guide.
To Next Page
Loading...
