8 - 3
Parts and Functions
Front Panel
Terminal Well
Place the terminal in this well to communicate with a host device, power the terminal, and charge the installed battery pack.
The base completely charges the main battery in a Dolphin terminal in 4 hours for the standard battery or 6 hours for the
extended battery. See page 8-6 for information on USB Communication between the host and terminal via the HomeBase.
Auxiliary Battery Well
See "Auxiliary Battery Well" on page 8-4
AUX Battery LED
Indicates status of the battery charging in the auxiliary battery well; see Back Panel on page 8-4.
For information about charging a battery in the auxiliary battery well, see page 8-5.
Dock LED
Indicates if a terminal is docked properly in the base.
COMM LED
This is the communication LED. It indicates the status of data transfer between the Dolphin terminal and the host device.
This color means…
Orange The auxiliary battery is charging.
Green The auxiliary battery has completed charging and is ready for use.
This color means…
Blue The terminal is properly seated in the base.
This color means…
Green A USB Connection is established with the host workstation.
2
Dock LED
Auxiliary Battery Well
AUX Battery LED
COMM LED
Terminal Well
To Next Page
Loading...
