3 - 5
Back Panel Features
Battery Door
The battery door covers and secures the main battery pack in the battery well. There is a
mechanical switch on the terminal under this door that puts the terminal in suspend mode (see
page 3-15) while the battery door is open. This door must be closed for the terminal to resume
operation. For more information, see Installing the Main Battery Pack on page 3-11.
DC Power Jack
Located on the bottom of the pistol-grip handle, the 9.5V DC power jack receives external
power from the Dolphin Power Cable. When connected to the Power Cable, the terminal is
powered and the main battery pack is charging. For more information, see Using the Power
Cable on page 12-2.
Tether Holes
These holes are an attachment point for the Battery Door Tether (Optional) (see page 3-7).
Battery Door
DC Power Jack
Tether Holes
To Next Page
Loading...
