7 - 4
Connections Manager
Microsoft’s connection manager sets up multiple network connections to Internet Service Providers (ISPs)
via an external modem.
Do NOT enter connection parameters in the Connections Manager if:
• You are using one of the on-board wireless radios to connect to a network.
The Dolphin terminal uses the settings from each radio’s configuration utility to connect.
• You are using Wireless Zero Config. By default, WZC is disabled on Dolphin terminals.
To Access the Connections Manager
Tap Start > Settings > Connections tab > Connections icon .
Task Tab
The Task tab enables you to initially configure, then manage network settings when using a modem.
Select an item in this list and then complete the setup screens that follow with the appropriate information
for your network.
My ISP
The links under this heading enables you to add and manage modem connections to an ISP. To complete
the setup screens, obtain the following information from your ISP:
• ISP dial-up access telephone number
• U s e r n a m e
• P a s s w o r d
• T C P / I P s e t t i n g s
My Work Network
These links enable you to establish the following connections types:
• M o d e m
• V i r t u a l P r i v a t e N e t w o r k ( V P N )
• *Proxy server connection
To complete the setup screens, obtain the network parameters from your system administrator.
To Next Page
Loading...
