4-40
4. CONFIGURATION
SUB-MATRIX PARAMETER CLASSIFICATION
ALARM
ACTION
DEFINITION:
Action on printer in case of alarm.
HOW TO MODIFY IT:
Select a new alarm action.
POSSIBLE VALUES:
NO ACTION: No effect on printing.
CHG SPD/INT: Change chart speed/print interval.
CHG RANGE: Change to range 2 if RANGE USED = with R1 and to range 1 if
RANGE USED = with R2
PRINT ON AL: Prints the channel trace when alarm condition occurs.
PRT INHIBIT: Stop all printing without data acquisition.
TAB SQTRACE: Print one tabular snapshot of values superimposed on
traces.
TAB SQBLANK: Print one tabular snapshot of values on blank paper.
PRT MATH LOG: Print one tabular snapshot of maths results.
CHG GROUP B:
CHG GROUP A to B: Print groups # i of channels defined in CHART
sub-matrix.
When the alarm turns ON, the group B is printed.
When the alarm turns OFF, the group A is printed.
CHG GROUP AB:
CHG GROUP A to A + B: Print groups # i of channels defined in CHART
sub-matrix.
When the alarm turns ON, groups A and B are printed.
When the alarm turns OFF, the group A is printed.
SEE ALSO:
RANGE USED in CHART sub-matrix for PRINT ON AL and CHG GROUP
GROUP DEF in CHART sub-matrix for CHG GROUP
To Next Page
Loading...
