Honeywell DT92E1000 User Manual

DT92 WIRELESS DIGITAL ROOM THERMOSTAT
3
EN0H 8580 UK07 R1 09/15
ORDERING SPECIFICATION
Model Description Literature
DT92A1004
Wireless digital room thermostat
(System pack, comprising DT92A room thermostat + BDR91 Relay Box)
Multi-lingual
DT92E1000
Wireless digital room thermostat with ECO energy saving feature
(System pack, comprising DT92E room thermostat + BDR91 Relay Box)
Multi-lingual
Note: the room thermostat and relay box in each system pack are pre-bound (linked together) at the factory. This
means they will recognize and communicate with each other as soon as they are powered up. The complete device
is therefore ready for immediate installation.
CONTROLS / DISPLAY LAYOUT
battery low warning
fault indicator
setpoint indicator
off/standby indicator
off/standby button
temperature display
frost protect indicator heating demand indicator
ECO m ode countdown timer
ECO button
ECO countdown indicatorECO mode active
setpoint change buttons
Room Thermostat
DT92A
RF communications
indicator
Relay Box
BDR91
Room Thermostat
DT92E
green LED, indicates
• relay on/off status
• transmission test
red LED, indicates
• status in binding or reset modes
• loss of RF comm unications
push button

Honeywell DT92E1000 Specifications

General

Type	Digital Room Thermostat
Display	LCD
Power Supply	2 x AA Batteries
Control	Wireless
Switching Voltage	230V AC
Protection Class	IP30
Frequency	868 MHz
Mounting	Wall-mounted
Communication	RF