Honeywell Electrode Steam - Humidity Control Options

YOUR NEW
Electrode Steam
The Electrode Steam comes supplied with a HumidiPRO Digital Control (see below), or you can use your home
thermostat (Prestige IAQ, VisionPro, or Lyric). You will use the humidity control to set the desired humidity level for
your home, and to turn the Electrode Steam on and off.
HumidiPRO Digital Control
• Automatic humidication control with advanced
window protection
• Optional manual humidication or dehumidication
control
Your HVAC Professional Installer will install the Electrode Steam in a proper location in your home. The best
location depends on your furnace type and conguration, and how your living space is arranged around the
furnace ducts. Your Electrode Steam will be remote mounted.
Remote mounting. The Electrode Steam is installed
some distance away from your furnace supply duct.
An insulated hose carries steam from the Electrode
Steam to a suitable location on the supply duct.
Remote mounting is required for the Electrode
Humidier.
How is my Electrode Steam installed?
M35763
Steam Humidication System 33-00165—01
6
Which humidity control do I have?