Honeywell EQUIP HD3MDIP - Figure 4-7 Compressions Settings Tab: Primary Stream; Figure 4-8 Video Codec Settings Tab Available Functions; Video Codec Settings Tab

52
IP Camera Web-Client
Figure 4-7 Compressions Settings Tab: Primary Stream
Your HD3MDIP/X camera provides dual simultaneous video streams. Although the Primary
stream can support a single MPEG4 SP in real time 30 fps at 720p resolution, it must be set
to less than 720P for the second stream to operate. The Secondary stream operates at a
lower frame rate than the Primary stream.
Video Codec Settings Tab
Figure 4-8 Video Codec Settings Tab Available Functions
Set the Resolution for NTSC or
PAL video signals
Set the Frame Rate (the number of
frames displayed on screen per
second)
Set the Priority for Quality or Bit
Rate
Set the Compression Ratio (when
Quality is selected)
Set the Target Bit Rate (the amount
of data processed per second)
Primary Stream Secondary Stream
Set the Maximum Bit Rate (kbps)
Set the GOP (Group of Pictures)
Default settings shown
Default settings shown