HD3MDIP/X Network Camera Reference Guide
Document 800-04132V1 Rev A 55
01/10
Camera Setup
The Camera Setup view provides access to the settings used to configure the camera
configurations for both Primary and Secondary streams. The following section explains
Auto Exposure and White Balance setup.
Note You must click Apply after you make changes to any settings to save those
changes. Settings are not saved unless you click Apply.
Figure 4-10 Camera Setup
Auto Exposure
The camera lens, lighting, and true day/night options can be configured as needed using
the Auto Exposure settings. Use Table 4-4 to set up Auto Exposure options.
To Next Page
Loading...
