62
IP Camera Web-Client
Figure 4-14 Video Analytics: Defining a Region
Note To disable a zone, click the VMD drop-down menu, then select Disable.
Alarm and Audio
Alarm Settings
Connect external devices such as sirens or flashing lights to the alarm output connector to
signal users of the camera that an alarm is activated. Set the Alarm Output as Normally
Open or Normally Close. See Connecting Alarms on page 20 for more information.
When alarm inputs are connected, the camera triggers an alarm only when the normal state
(open or closed) changes. An alarm message appears on the Web-Client screen (see
Figure 4-13) to notify the operator.
Region-defining box
To Next Page
Loading...
